Vinyl Banner Welding Machine / Hot Air PVC Seaming Machine Multiple
Equipment of various operating components Features:
1. The main switch
It is used to start and shut down the total power of the device
(through rotation control). The device is prohibited from shutting
down the main power at high temperature. Should stop the device
heating (turn off the heating switch knob) to be the actual
temperature dropped to 50 degrees, before closing the device
2. Walking speed control knob
Used to adjust the running speed of the machine (by adjusting the
3. Heating switch knob
Used to start and shut down device heating (via rotation control)
4. Control panel buttons
The operating element is three, the front of the display screen is
the red button (increase the set temperature) middle green button
(reduce the set temperature) under the green button (the device
from dormant state to work state).
welding machine principle:
Heating through the heating core, wind gun blowing hot air, hot air
hot melt flex banner, walking motor driven rubber wheel pressure
Neen’t glue,Spliced out of the product is not open plastic,no
bubble,No wrinkle,Quality guaranteed,import Ieiser,long
live,Infrared laser positioning,Stitching precision,LED lights,easy
to operate it at night.With handrails,Standing still can
operate,Interior with automatic sleep function,to Protect the
heating core,Extend machine life.
|Machine Name||Good quality Flex Banner Welding Machine|
|Temperature scope||20-700 degree|
|Hot air gun||LST 3400W hot air gun|
1. During operating, if the surface cloth is dissolved and scorched
or the cloth are not sticked together, please stop to adjust the
temperature or speed.
2. During operating,if the seaming part is not in right position,
please stop to adjust fixing position.
3. During operating, make sure clothes are flat so that stick
4. The hot wind of heater cannot touch the press-wheel or the
rubber of press-wheel is easy to be burned down.
5. Adjust temperature to zero before turn off the heater.Switch off
after 5-10 minutes.